Instrumentation
Experimental combustion unit GEMOS 110 kW
- Measurement of efficiency by direct and indirect methods
- Exact setting of temperatures (up to 200 °C) and combustion airflow
- Return water temperature control
- Wide fuel base
- Connected oxygen source up to 15 m3/hour
- Sophisticated measurement and control system
FLIR SC660 thermovision camera
- Temperature range -40 až 1500 °C
- Accuracy +/- 2°C
- Temperature resolution: <0.045 °C (at 30 °C)
- Display frequency 30Hz, 640x480 pixels
- On-line data recording and evaluation
- A large number of functions for measurement and evaluation
Fritsch ANALYSETTE 22 MicroTec plus laser particle distribution analyser
- Measurement of particle size in the range of 0.08 - 2000 micrometres
- Measuring time 5 - 10s, whole cycle 2min
- Particles analysed after dispersion in a liquid medium
- Possibility to reduce the amount of liquid for a small amount of sample
- Measurement of difficult-to-wet samples with a surfactant
Electrostatic classifier 3080L and condensing particle counter 3775
- Measurement of particle concentration in the size range 10 nm to 1000 nm
- Particle concentrations measured in a gaseous medium
- Primary gas dilutable in a ratio of 1: 1 to 1:30
- Possibility to generate particles from 20 nm in size
DANI Master GC-FID gas chromatograph
- Three-channel gas chromatograph with flame ionisation detector (FID) with the possibility of programmed temperature vaporiser (PTV), split, splitless, on a column
- Carrier gas: hydrogen
- Auxiliary gas: nitrogen
- Software: Clarity
Measuring stand for heat engines
- Maximum steam pressure 1.4 MPa abs.
- Steam temperature - saturated steam at a given maximum pressure
- Maximum power 700 kW
- Minimum condensation temperature 40 °C
- Maximum condenser pressure 1.4 MPa abs.
- Natural gas connection for cogeneration units testing
Test corner for measuring boilers and local heaters of small outputs for solid fuels
- Maximum heat output 50 kW
- Measurement of efficiency and emissions (CO, CO2, NOx, SOx, dust)
- Measurement of fuel loss on the weighbridge with an accuracy of 20g
- Surface temperature measurement
- Measuring the warming of adjacent objects
- Analysis of heat fluxes using thermovision camera
Thermogravimetric analyser (TGA) Jupiter 449 F3 - NETZSCH
- Temperature range: 20 °C (ambient temperature) to 1600 °C
- Heating and cooling speed (max.): 50 K/min up to 1200 °C, 20 K/min above 1200 °C
- Weight range: up to 35g
- Balance accuracy for TGA: 1 μg
- Possible type of test atmosphere: inert, oxidising, reducing, static, dynamic
- Changeover valve for two pure gases and one shielding gas
- Possibility of mass flow control for 3 gas channels
- Vacuum-tight design of the device allows reaching a pressure of 10-2 mbar
Calorimeter IKA C200
- Semi-automatic measurement of combustion heat of solid and liquid substances
- Measured sample 0.3 - 1.3 g
- Manual filling with water and oxygen
- Working temperature 18 - 25 °C
- Measuring range 0 - 40 MJ
- Measuring modes: isoperibolic (17 min), dynamic (8.6 min), manual, time-controlled
Electric observation furnace Clasic 0116 E
- Measuring temperature: 25 °C to 1600 °C
- Heating speed: 0 to 50 °C/min
- Possibility of a photographic recording of the sample during the measurement
- Option to select the sample photograph interval (controlled by temperature)
- Evaluation software allows more accurate evaluation of photographed images
Experimental gasification unit Biofluid 2
- Power consumption of the device 150 kW
- Power (in gas) 100 kW
- Possible fuel: biomass, waste
- Possible types of gasification medium: air, water vapour, oxygen and their combinations
On-line gas analyser
- Portable gas analyser for on-line measurement of CO, CO2, O2, H2 and CH4
- Continuous recording of calorific value/combustion heat in MJ/m3
- Gas flow 0.7–1.2 l/min, adjustable by a needle valve
- The operating temperature of the measured gas 0–50 °C, gas inlet pressure 20–100 mbar
Palas Promo® 2000 particle counter
- Particle measurement based on light scattering
- Measuring range of 0.2–105 µm
- Particle size distribution
- Concentrations up to 1,000,000 /cm3
- On-line monitoring with a time resolution of 1 s
- The flow of analysed gas 5 l /min
Cascade impactor Dekati HT-DLPI +
- Fourteen-stage cascade impactor
- Heated up to 180 °C
- Evaluation by gravimetric analysis
- Measuring range of 0.014–10 µm
- Suitable for subsequent chemical analysis
- Heated dilution system minimises condensation
Muffle annealing furnace LAC L 12/15
- Operating temperature up to 1200 °C
- Power consumption 3.5 kW
- Volume 15 litres
- Up to 30 work programs in 15 steps
- Protective atmosphere supply
- Determination of ash content (ignition loss), volatile combustibles
Ultrasonic bath Bandelin Sonorex Super rk 106 106
- round stainless-steel tub
- ultrasound frequency 35 kHz
- internal dimensions of the bath 240 x 130 mm
- timer for 1 - 15 min and continuous operation
Double beam UV-VIS spectrophotometer Metash UV-9000
- measurement in the range 190 - 1100 nm (deuterium, tungsten lamp)
- adjustable slot width 05; 1; 2; 4 nm
- measurement at multiple wavelengths, scanning the spectrum at a given wavelength
- determination of inorganic ions in solutions
Rotary high-speed grinder Fritsch Pulverisette 14 classic
- speed 6 - 20 thousand RPM
- cyclone separator for grinding small amounts of samples with a suction system into a glass bottle
- sieves with mesh size: 2.0 mm; 1.5mm; 0.5 mm; 0.2 mm; 0.12 mm; 0.08 mm
- maximum grinding rate 5 L/hour
- area of application: soft materials (such as plants, wood, roots, leaves, needles, spices, textiles, chemicals, food, grain, chalk, coal, soil), medium-hard materials (such as pharmaceuticals, fertilizers, pellets, feed)
Analytical balance Ohaus Pioneer Semi-Micro 225 D
- Weighing pan - diameter 90 mm
- Weighing capacity 110 g, smallest division 0.0001 g
- RS232 interface
- Possibility of external/internal calibration
- Stabilisation time 4s
Apparatus for determining the minimum ignition temperature of suspended coal dust
- is used to perform ignition tests of suspended dust carried by a pulse of compressed air through a heated ceramic furnace
Apparatus for determining the ignition temperature of coal dust
- is used to determine the minimum temperature of the surface covered with flammable dust at which the dust ignites.
Halogen drying balances KERN MLS
- IR heating, drying temperature 40 - 160 °C in steps of 1 °C
- Measurable humidity range 0.01% - 100%
- Weighing capacity 50 g, actual division 0.001 g
- Weighing pan size 90 mm
- RS232 interface
Laboratory drying oven Venticell 111 komfort
- Temperature range + 10 °C above room temperature - 250 °C
- 6 types of adjustable programs, optional ramp slope
- Fan speed 0% - 100%
- Interior space w 540 x d 390 x h 530 mm
An open container according to Cleveland
- measurement of the flash point and flash point of liquids
- fy Clasic NCL 120 model with electric heater and regulation
- works according to ASTM D 92, IP 36, ČSN EN ISO 2592 standards
- temperature range: laboratory temperature - 450 °C
- open brass test crucible
Closed container according to Pensky - Martens
- measurement of the flash point and flash point of petroleum products
- fy Clasic NPM 120 model with electric heater and regulation
- works according to ASTM D 93, IP 34, ČSN EN ISO 2719 standards
- temperature range: laboratory temperature - 360 ° C
- brass test crucible with lid with ignition mechanism
Brio BSL-2 hydraulic laboratory tablet press
- inner diameter of the tablet preparation is 10 mm
- maximum work forces up to 25 tons depending on the tableting agent used
- force value read on the manometer
- pellet pressing for calorimetry and TGA, IR spectroscopy, etc.
Apparatus for measuring the ignition of liquids
- used to measure the flashpoint of liquid substances, up to temperatures of 600 °C
Apparatus for measuring the flammability temperature of solids
- the environment of the electrically heated ceramic furnace with the possibility of temperature changes is used to monitor the ignition of solids
Digital rotary viscometer VISCO STAR PLUS R
- Measurement of the braking effect of the fluid on the rotating disk; speed 0.3 - 100 per min.
- Measuring range 100 - 13.10E6 mPa.s, accuracy ± 1% of total range, reproducibility ± 0.2%
- 6 pieces of standard discs
- Continuously measured temperature with a built-in temperature sensor 0 - 100 °C, accuracy ± 0.1 °C
- RS232 interface, compatible with MS Excel
Portaflow 330 portable ultrasonic flow meter
- Flow range 0.1 m/sec to 20 m/sec bi-directional.
- Measurement accuracy ± 3% for pipe 13 to 75 mm at flow> 0.2 m/s and ± 0.5% to ± 2% for pipe> 75 mm at flow> 0.2 m/s.
- Output 0/4 to 20 mA, RS 232, USB, pulse.
- Rechargeable battery with a life of 20 hours on a full charge.
Fritsch Analysette 3 Pro vibratory sieve shaker
- Sieves with a diameter of 20 cm and a mesh size: 5.6 mm; 2.0 mm; 1.4 mm; 1.0 mm; 0.71 mm; 0.5 mm; 0.355 mm; 0.25 mm; 0.2 mm, 0.16 mm; 0.125 mm; 0.09 mm; 0.063 mm; 0.045 mm
- Amplitude 0.1 - 3 mm
- Setting the sieving time 1 - 30 min.
- Possibility of wet sieving of the sample with water washing
- Laborette 17 ultrasonic sieve cleaner is included
XS Instruments OXY70 oximeter
- Luminescent Dissolved Oxygen Sensor (LDO) measurement with 2 m cable
- Measurement of oxygen saturation (%), dissolved oxygen (mg/l) in aqueous samples
- Saturation 0 - 400%
- Amount of dissolved oxygen 0 - 50 mg/l
- Temperature measurement of 0.6 - 60 °C
- Possibility of salinity compensation
- Automatic pressure measurement and pressure compensation during the measurement
Agilent 8860 gas chromatograph
- determination of permanent gases and simple hydrocarbons in the gas phase
- two-valve system with the possibility of dosing with a gas-tight syringe or a glass "mouse" sample card
- capillary columns: Molsieve 5A, HP fence Q
- detectors: FID, TCD
- carrier gas: helium
- auxiliary gases: nitrogen, air, hydrogen
- determination of nitrogen, hydrogen, oxygen, carbon dioxide, carbon monoxide, methane, ethane, ethylene, acetylene.
